The SpacingTool Snow Guards Project Estimator and Spacing Tool

Answer each question accurately. * Denotes required field.
Valid fields will display a green check mark.
Any request containing invalid submittal information will automatically be null and void.

1. PLEASE ENTER THE COMPLETE PROJECT DETAILS:

Company Name: Full Name: Email: Address: City: State: Zip Code: Phone: Fax:	Project Name: Project Location: Area Snow Load: Project Zip Code: Referred By:

2. PLEASE SELECT THE PANEL PROFILE THAT BEST MATCHES THE PROJECT ROOF:

Screw-Down Panels: Common thru-fastened panels. Choice of mechanical or adhesive mount.

"R" Panel

The "R" or "PBR" is a common panel that is typically 36" wide with 9" or 12" major rib centers, 7" or 10" valley widths and a 1-1/4" - 1-1/2" rib height. Measure flat area between any minor ribs on center.

"U" Panel

The "U" Panel is a common panel that is typically 36" wide with 6" rib centers, 4" valley widths and a 3/4" rib height. Measure flat area between any two side by side major ribs on center.

Industrial Rib

The Industrial Rib or "7.2 Rib" is typically 36" wide with 7.2" rib centers, 4" - 5" valley widths and a 1-1/2" rib height. Measure flat area between any two side by side major ribs on center.

Standing Seam: Common floating panels. Adhesive mount only.

Smooth Panel Standing Seam

The Vertical Seam panels and Snap Seam panels and are typically 12" to 24" wide, floating/standing seam, with a smooth valley. These panels have no minor ribs or ridges. Measure flat area between seams on center.

Ribbed Valley Standing Seam

The Trapezoidal panel is typically 24" wide, floating/standing seam, with ridges or ribs in the valley. These panels have ribs or ridges in the valley. Measure flat area width between major ribs and minor ribs on center.

Insulated Panels: Flat profiled metal roofing. Adhesive mount only.

Metal Shingle or Flat Profile Metal Roofing

Insulated Panel, Metal Shingle and Flat Profile Metal Roofing with slight or no extrusions. If there are uniform ridges or ribs, please select a panel from above.

Rubber Roofing: Flat profiled rubber roofing. Mechanical mount only.

Rubber and Membrane Roofing

Sprayed or rolled, rubber or membrane roofing.

3. PLEASE SELECT THE PANEL DETAILS THAT BEST DESCRIBE THE PROJECT ROOF:

You must select the Panel Profile above.

4. PLEASE SELECT THE DESIRED METHOD OF ATTACHMENT:

You must complete the Panel Profile above.

5. PLEASE SELECT THE DESIRED SNOW GUARD MODEL:

You must select the method of attachement above.

6. PLEASE ENTER THE ROOF DIMENSIONS FOR EACH SEPERATE ROOF AREA:

You must select the Snow Guard model above.

7. PLEASE INDICATE WHETHER OR NOT THIS QUOTE INCLUDES ISOLATED PLACEMENTS:

You must at least 1 roof area above.

Check for any errors before submitting request. Valid fields will display a green check mark.
Your submission is not complete until you receive a Drawing Number.